• Length - 6' 10"
  • Width  -  22"
  • Nose  -  15 1/4
  • Tail  -  15 3/8"
  • Thickness  -  3"
  • Nose Rocker  -  5 1/4"
  • Fin - Single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat to double concave
  • Construction - Fishbone frame
  • Vent - Brass or plastic
6' 10" Steves Performer
Steve Miller is a big guy who's been riding longboards for a long time.
He told us he wanted something in the 6 1/2 to 7 foot range that
would let him rip.  What we came up with is a 6' 10" performance
board that he loves.  Its got a flat bottom that transitions into a double
concave in the rear. We made the rails 50/50 in the nose and
transitioned to very hard rails in the rear.

Steve clocks in right at 200 lbs. and has no flotation issues with the
board. He's going to add two - and possibly four - more fins soon.
The possibilities are endless!
  • Surfboard Plans
  • Glassing and Fin Kits
  •  Accessories
  • Total Support
Full size templates printed
out on a regular ink jet or
laser printer.
Actual frame made from the
templates printed on ink jet printer.
Steve Miller
Order Your 63 page PDF Instruction Manual and Full Size Plans Here
You will automatically receive the full size templates for the 6' 10" "Steve's Performer"
with your order. You can order additional templates using the drop down window below.   
6' 10" Steve's Performer Instructions and Templates
Order here and pay with any credit card through PayPal.  
The new versions aren't set up for instant download yet
so I'll send them directly as soon as possible.  If you are
outside the US it may be a few hours.
This is an eBook. The spar templates are also sent as
pdf files via email. You simply print the templates on a
standard printer and paste them together.  Templates
require between 6 and 11 sheets of paper depending on
the size.
Site created by Jack Young.  All original art and photography (except as noted}.  Material on this site may not be duplicated without permission.
See more builders on our Facebook
page.  Send us pics of your build and
See more builders on our Facebook
we'll show you off to the world too!
Got questions or comments?  Email me any time at
When you order they ask for your phone
We won't call you unless you email
and ask us to!
 It's required by the Yahoo store.
Don't worry, you'll never get spam calls from us.
f you order the 6'10" Steve's Performer instructions and templates above you can
add templates for other boards for only $4.99 each.  
These templates are sold in addition to the book above and are not sold alone.
Additional Templates
Please Note:
This is not the same instruction
manual as the flat-top board

It is unique to the dome top
boards and the instructions are
similar but not interchangeable .