Steve Miller is a big guy who's been riding longboards for a long time. He told us he wanted something in the 6 1/2 to 7 foot range that would let him rip.  What we came up with is a 6' 10" performance board that he loves.  Its got a flat bottom that transitions into a double concave in the rear. We made the rails 50/50 in the nose and eased into to very hard rails in the rear but you can make any profile you like.

Steve clocks in right at 200 lbs. and has no flotation issues with the board. He's going to add two  (and possibly four) more fins soon. The possibilities are endless!


Our instructions were first released in 2005 and have gone through many updates and revisions since then.  As a registered buyer you'll get updates free for life.  We guide you from selecting the wood to glassing the board and everything in between.  There are 78 pages with over 200 illustrations currently.  We know there are lots of sites showing wood surfboard builds but you wouldn't buy a new car and say "I'll just use the manual from my old car" would you?  Our instructions were written for our plans and are the best in the industry.    

6'10" Performer Full Size Templates


    • Length - 6' 10"
    • Width  -  22"
    • Nose  -  15 1/4
    • Tail  -  15 3/8"
    • Thickness  -  2 3/4"
    • Nose Rocker  -  5 1/4"
    • Fin - Single or Thruster
    • Glassing - 4 oz, E glass
    • Suggested resin - epoxy
    • Glass schedule - 2 deck, 1 bottom
    • Bottom profile - flat to double concave
    • Construction - Fishbone frame
    • Vent - Brass or plastic

    So don't use the wrong instructions.






Things you'll need to complete your board.