The plan set contains 4 pages of dimensional drawings and detail
drawings to build the voyager paddleboard.  This is a stitch and glue
paddleboard that is easy to paddle and quick to build.  

Average building time is 20-40 hours but it really depends on your
experience. Realistically you can add about another 10-20 hours for
lofting and cutting out the parts.

The plan set includes the manual that comes with the kit and also
includes full size bulkhead drawings for the board and full size tip and
tail drawings for the bottom and side panels.

Materials needed to build the board are:

  • 3 sheets of 3mm plywood, either marine grade okoume or
    palownia will give you the lightest board.
  •  About a quarter sheet of 4 or 6mm wood for the bulkheads
  •  64 feet 3/4"x3/4" lumber for sheer clamps and stringers
  •  14 yards of 2" 6oz Fiberglass Tape
  •  10 yards 4oz x 50" glass cloth.
  •  1.5 Gallon kit of Epoxy Resin and Hardener
  •  1 quart kit of wood flour
  •  1 50 ml syringe of 5 minute epoxy
  •  1 block of foam for fin box approximately 6" x 14" x 1.25"
  •  Longboard Fin Box
  •  Fin
  •  Deck Pad
  •  Black annealed wire for stitching
  •  Misc. brushes, squeegees, and mixing cups.

Planset ships free within the US, international orders we will contact
you with shipping charges.
In a hurry to get started?  Get the full size plans
and cut anywhere from 10 to 20 hours off your
build.

Voyager 14 full size patterns consist of full size paper patterns for
the plywood panels and bulkheads for the voyager SUP plus a copy
of the regular plan set and building manual.

Full size patterns eliminate the need to loft from drawings and
speed up the construction process.

Materials needed to build the board are:  

  • 3 sheets of 3mm plywood, either marine grade okoume or
    palownia will give you the lightest board.
  • About a quarter sheet of 4 or 6mm wood for the bulkheads
  • 64 feet 3/4"x3/4" lumber for sheer clamps and stringers
  • 14 yards of 2" 6oz Fiberglass Tape
  • 10 yards 4oz x 50" glass cloth.
  • 1.5 Gallon kit of Epoxy Resin and Hardener
  • 1 quart kit of wood flour
  • 1 50 ml syringe of 5 minute epoxy
  • 1 block of foam for fin box approximately 6" x 14" x 1.25"
  • Longboard Fin Box
  • Fin
  • Deck Pad
  • Black annealed wire for stitching
  • Misc. brushes, squeegees, and mixing cups.

Domestic Shipping is included in price.  For international orders we
will contact you with shipping costs prior to billing your card.
THE VOYAGER IS A GREAT SUP YOU CAN BUILD FAST
USING STITCH AND GLUE TECHNIQUES!
  • voyager 1
  • voyager 2
  • voyager 3
  • sunset
  • voyager planset 5
Voyager 14 Full Size Patterns
The Voyager 14 Plan Set
You can choose a full size plan set to get going
right away or, if you are at ease lofting plans get
The Voyager is a 14' hollow wooden stand up paddleboard built  
using stitch and glue techniques. This board features a V entry to
transitions from the V at the bow to flat through the tail of the board
track nicely through the water making the board a  pleasure to
paddle.  

Build time is estimated to be between 35-60 hours depending on
your skill level and level of finish desired.

Stand up paddle boards make a great first time boat building project
because the insides don't need to be finished and they don't have a
lot of parts like hatches and coamings that really add to the time it
takes to finish a project.  The Voyager SUP is designed to be a great
first time boat building or board building project.
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form7'].method='post'">
Error: Data not available (103)
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form8'].method='post'">
Error: Data not available (103)
Got questions or comments?  Email me any time at
jack@woodsurfboardplans.com
WoodSurfboardPlans.com
  • Glassing and Fin Kits
  •  Accessories
  • Total Support