• Length  -  6' 10"
  • Width  -  22"
  • Nose  -  15 1/4
  • Tail  -  15 3/8"
  • Thickness  -  2 3/4"
  • Nose Rocker  -  5 1/4"
  • Fin - Single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat to double concave
  • Construction - Fishbone frame
  • Vent - Brass or plastic
You print the full size rib and spar templates on your own printer. No special equipment required!
Chose from one of our designs shown below. You get full size templates that you print out on any inkjet or laser printer on standard  8 1/2" paper.  
All templates and instructions are sent as PDF files and you can print your own copy on any ink jet or laser printer.
6' 10" Steves Performer
  • Length - 9' 8"
  • Width  -  22 3/4"
  • Nose  -  15 5/8"
  • Tail  -  15"
  • Thickness  -  3 1/4"
  • Nose Rocker  -  5"
  • Fin - Single, Thruster, Quad, Twinzer
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
9' 8" Trestle's Cruiser
  • Length - 8' 6"
  • Width  -  22 1/4"
  • Nose  -  17"
  • Tail  -  14 7/8"
  • Thickness  -  2 3/4"
  • Nose Rocker  -  4 5/8"
  • Fin - Single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
8' 6" Pintail Funboard
  • Length - 5' 8", 6' 2" and 7'2"
  • Width  -  22", 23 1/4"
  • Thickness  -  2 1/4", 2 1/4"
  • Nose Rocker  -  3", 3"
  • Fin - Twin Keel or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - Flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
Fish Boards
WoodSurfboardPlans.com
  • Surfboard Plans
  • Glassing and Fin Kits
  •  Accessories
  • Total Support
7' 2" Mini Mal
  • Length - 7' 2"
  • Width  -  21"
  • Nose  -  16 1/4"
  • Tail  -  14 3/4"
  • Thickness  -  2 3/4"
  • Nose Rocker  -  4 3/4"
  • Fin - Single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
  • Length - 9' 6"
  • Width  -  31 5/16"
  • Nose  -  18 15/16"
  • Tail  -  19 1/8"
  • Thickness  -  4 9/16"
  • Nose Rocker  -  1 11/16"
  • Single or any combination
  • Glassing - 4/6 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - Flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
9' 6" Stand Up Paddleboard (SUP)
Can't decide?  Once you've bought the instructions and templates for your first board
you can buy additional templates for only $4.99 each
Site created by Jack Young.  All original art and photography (except as noted}.  Material on this site may not be duplicated without permission.
See more builders on our Facebook
page.  Send us pics of your build and
we'll show you off to the world too!
Got questions or comments?  Email me any time at
jack@woodsurfboardplans.com
BUILDING MATERIALS TO COMPLETE YOUR BOARD
  • Length - 7' 10"
  • Width  -  22" 1/4"
  • Nose  -  16 5/8"
  • Tail  -  15 7/16"
  • Thickness  -  2 7/8"
  • Nose Rocker  -  4 7/8"
  • Tail Rocker - 2 9/16"
  • Fin - Single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
7' 10" Spherical
9' 0" LONGBOARD
  • Length 9' 0"
  • Width  -  22" 7/8"
  • Nose  -  19 13/16"
  • Tail  -  14 1/2"
  • Thickness  -  3 1/8"
  • Nose Rocker  - 5"
  • Tail Rocker - 3"
  • Fin - single or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
  • Length - 10' 0"
  • Width  -  23"
  • Nose  -  18 9/16"
  • Tail  -  15 7/16"
  • Thickness  -  3 1/4"
  • Nose Rocker  -  5 9/16"
  • Tail Rocker 3 1/16"
  • Fin - Singlel or Thruster
  • Glassing - 4 oz, E glass
  • Suggested resin - epoxy
  • Glass schedule - 2 deck, 1 bottom
  • Bottom profile - flat
  • Construction - Fishbone frame
  • Vent - Brass or plastic
10'0" LONGBOARD
LONGBOARDS
STAND UP PADDLEBOARD
INTERMEDIATE AND PERFORMANCE BOARDS
SHORT BOARDS